HobbyWireless
MINI RECEIVER VD5M 5 CH/ LED
| Compatibility | ► FrSky modules |
| ► Dimension | 21*16*5.8mm |
| ► Weight | 2.0g / 1.6g (naked) |
| ► Operating Voltage Range | 3.0V-7.2V |
| ► Operating Current | 20mA |
| ► Operating Range | >300M |
Details:, Super small and light weight, the FrSky VD5M is a perfect choice for park flyers and indoor models. It weighs in at only 2 grams!, Specifications:, ► Number of Channels: 5, Features:, ► Super small and light, designed for park flyers and indoor air crafts;,
Additionally, this RX is part of the FrSky "two way ...Hobby-Lobby
SENSEI SPORT TRAINER RX-R
Another Tx-R advantage: the included components are installed and expertly matched to the model for optimum performance � no guessing what motor, battery or servos will work best!, Key Features:, Aero-Cell foam construction with a "drop door" in fuselage to deploy a parachute or other creative payloads while in flight, Warranty (through the manufacturer): Flyzone guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.,
Sensei Sport Trainer Rx-R The beauty of Tx-R technology is ...HiModel
CARBON FIBER AERIAL TILT FOR BUMBLE BEE ST550
| Structure | Carbon fiber |
| Weight | 175g/ 6.2oz (excluding servos) |
| Camcorders Span | 12CM |
| Camcorders Height | 80mm |
| Weight | 100g / 3.55oz |
, , , , , , Specifications:, , , , , , , , , , , Carbon Fiber Aerial Tilt for, BUMBLE BEE, Can also used for other multi-rotor air crafts with similar mounting structure., , ,
Includes/Requires: Includes:1 x tilt 1 x servo (installed)SDSHobby
DLA56 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 56CC FOR GAS AIRPLANES WITH WALBRO CARBURETOR AND NSK BEARING
| Power | 5.6HP/7600rpm (DLE55 5.5HP/7500rpm) |
| Idle Speed | 1350 rpm/min |
| Pulling Force | 15.2Kg / 100 meters Altitude (14.2kg for DLE55) |
| Recommended Propeller | 22x8, 22x10, 23x8, 23x10 |
| Sparking Plug | NGK CM6 (NGK CM6 made in China for DLE55) |
| Carburetor | Walbro (made in Japan) |
| Exhaust Amount | 56cc (DLE55= 55.6cc) |
| Diameter*Stroke | 45mm*35mm |
| Ratio of Compression | 7.8 |
| Weight | Main Engine |
| Material of Muffler and crankcase | Aluminum Magnesium Alloy (Aluminum Alloy for DLE55) |
| Machining | CNC processed, while others are not. |
| Crank Case Material | the newest aero material makes DLA56 engines too hard to be damaged. |
Parameters & Performance:, Ratio of Lubricating Capacity: 30: 1 (Trial Run), 40: 1(Normal Flying), Included Spare Parts:, 1 x DLA 56CC Engine, Features:,
13.5Kg / 1800 meters Altitude (12.5kg for DLE55) 1 x ...SDSHobby
DLA112 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 112CC FOR GAS AIRPLANES WITH DOUBLE CYLINDERS AND NSK BEARING
Parameters & Performance:, , Power:, 11.5 HP/ 7500RPM, Idle Speed:, 1400rpm/min, Pulling Force:, 5.8kg/100M Altitude, 28.3kg/1800M Altitude, Recommended Propeller:, 6x12, 27x12, 28x10, Spark Plug Special:, CM-6, Exhaust Amount:, 112cc, Cylinder Bore*Stroke:, 45.1mm x 35mm, Compression Ratio:, 7.8 : 1, Lubrication Ratio:, 30 : 1( Break in), 40 : 1(Normal Flying), Weight:, Main Engine-2485g, Exhaust Pipe-115g*2pcs, Ignition-160g (lighter than the current DLE111), Included Spare Parts:, , Features:, , Material of Muffler and crankcase:, Aluminum Magnesium Alloy (Aluminum Alloy for DLE111), Machining:, CNC processed while others are not., Crank Case Material:, the newest aero material make DLA112 engines too hard to be damaged.,
1 x DLA 112CC Engine 1 x Exhaust System 1 ...SDSHobby
DLA32 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 32CC FOR GAS AIRPLANES WITH SINGLE CYLINDER AND NSK BEARING
Parameters & Performance:, , Power:, 3.8HP/8200rpm, Idle speed:, 1700rpm/min., Pull Force:, 8.8Kg /100meters Altitude, Recommended Propeller:, 18x8, 18x10, 19x8, 20x8, Spark Plug:, CM-6, Amount:, 32.23cc, Diameter* Stroke:, 37mm*30mm, Ratio of Compression:, 7.6 : 1, Lubrication Ratio:, 30 : 1 (Trial Run), 40: 1--50 : 1(Normal Flying), Weight:, Main engine -910g, Muffler-65g, Ignition-100g, Included Spare Parts:, , Features:, , Material of Muffler and crankcase:, Aluminum Magnesium Alloy (Aluminum Alloy for DLE30), Machining:, , Crank Case Material:, the newest aero material makes DLA32 engines too hard to be damaged.,
7.8Kg /1800meters Altitude Exhaust 1 x DLA 32CC Engine 1 ...HobbyWireless
BOBCAT GRAY 40A ARF WITH RETRACTABLE GEAR
| Material | EPO |
| Wingspan | 1143mm(45inch) |
| Flying Weight | 1400g（49.5oz） |
| Drive System | 3536 KV1000 motor |
| Speed | 130Km/h |
| Servo | 7*9g servos |
| Propeller | 3 Blabes 7x6 |
Details:, The Bobcat also known to some as the Falcon is a craft popular among heaps of radio control airplane enthusiasts. The Bobcat is a pusher prop propelled plane constructed of durable and resilient EPO foam. The wings span 45 inches with a total wing area of 480in2 . The total length of the plane stretches 51 inches. The 7.5x9 prop is propelled by a 1000KV brushless outrunner motor supported by an 40 amp brushless electronic speed controller. Power is derived from a recommended 14.8v 2700mah lithium battery. Control surfaces are delegated to seven 9 gram servos. Flaps are also equipped on this plane to slow it down nice and easy before landings. Upon receiving the plane one will notice the little details that show this plane is nicely put together. The servos covers, composite hinges, and sleek LED placement on the fuselage represents a well thought out package.,
Features Length： 1295（51inch） Thrust Force：1300g（46oz） ESC： 40A Top Landing Gear：3 ...HobbyWireless
BOBCAT GRAY 80A ARF WITH RETRACTABLE GEAR
| Material | EPO |
| Wingspan | 1143mm(45inch) |
| Flying Weight | 1400g（49.5oz） |
| Drive System | 3720 KV1250 motor |
| Speed | 180Km/h |
| Servo | 7*9g servos |
| Propeller | 3 Blabes 7x6 |
Details:, The Bobcat also known to some as the Falcon is a craft popular among heaps of radio control airplane enthusiasts. The Bobcat is a pusher prop propelled plane constructed of durable and resilient EPO foam. The wings span 45 inches with a total wing area of 480in2 . The total length of the plane stretches 51 inches. The 7.5x9 prop is propelled by a 1250KV brushless outrunner motor supported by an 80 amp brushless electronic speed controller. Power is derived from a recommended 14.8v 2700mah lithium battery. Control surfaces are delegated to seven 9 gram servos. Flaps are also equipped on this plane to slow it down nice and easy before landings. Upon receiving the plane one will notice the little details that show this plane is nicely put together. The servos covers, composite hinges, and sleek LED placement on the fuselage represents a well thought out package., Note:, This new 80A model uses different motor and no longer overloads the ESC.,
Features Length： 1295（51inch） Thrust Force：1300g（46oz） ESC： 80A Top Landing Gear：3 ...HobbyWireless
BOBCAT RED 40A ARF WITH RETRACTABLE GEAR
| Material | EPO |
| Wingspan | 1143mm(45inch) |
| Flying Weight | 1400g（49.5oz） |
| Drive System | 3536 KV1000 motor |
| Speed | 130Km/h |
| Servo | 7*9g servos |
| Propeller | 3 Blabes 7x6 |
Details:, The Bobcat also known to some as the Falcon is a craft popular among heaps of radio control airplane enthusiasts. The Bobcat is a pusher prop propelled plane constructed of durable and resilient EPO foam. The wings span 45 inches with a total wing area of 480in2 . The total length of the plane stretches 51 inches. The 7.5x9 prop is propelled by a 1000KV brushless outrunner motor supported by an 40 amp brushless electronic speed controller. Power is derived from a recommended 14.8v 2700mah lithium battery. Control surfaces are delegated to seven 9 gram servos. Flaps are also equipped on this plane to slow it down nice and easy before landings. Upon receiving the plane one will notice the little details that show this plane is nicely put together. The servos covers, composite hinges, and sleek LED placement on the fuselage represents a well thought out package.,
Features Length： 1295（51inch） Thrust Force：1300g（46oz） ESC： 40A Top Landing Gear：3 ...HobbyWireless
BOBCAT RED 80A ARF WITH RETRACTABLE GEAR
| Material | EPO |
| Wingspan | 1143mm(45inch) |
| Flying Weight | 1400g（49.5oz） |
| Drive System | 3720 KV1250 motor |
| Speed | 180Km/h |
| Servo | 7*9g servos |
| Propeller | 3 Blabes 7x6 |
Details:, The Bobcat also known to some as the Falcon is a craft popular among heaps of radio control airplane enthusiasts. The Bobcat is a pusher prop propelled plane constructed of durable and resilient EPO foam. The wings span 45 inches with a total wing area of 480in2 . The total length of the plane stretches 51 inches. The 7.5x9 prop is propelled by a 1250KV brushless outrunner motor supported by an 80 amp brushless electronic speed controller. Power is derived from a recommended 14.8v 2700mah lithium battery. Control surfaces are delegated to seven 9 gram servos. Flaps are also equipped on this plane to slow it down nice and easy before landings. Upon receiving the plane one will notice the little details that show this plane is nicely put together. The servos covers, composite hinges, and sleek LED placement on the fuselage represents a well thought out package., Note:, This new 80A model uses different motor and no longer overloads the ESC.,
Features Length： 1295（51inch） Thrust Force：1300g（46oz） ESC： 80A Top Landing Gear：3 ...SDSHobby
DLA58 CNC PROCESSED GASOLINE ENGINE/PETROL ENGINE 58CC FOR GASOLINE AIRPLANES WITH WALBRO CARBURETOR AND NSK BEARING
| Power | 6.0HP/8500rpm |
| Idle Speed | 1300 rpm/min |
| Pulling Force | 15Kg / 100 meters Altitude (14.2kg for DLE55) |
| Recommended Propeller | 22x8, 22x10, 23x8, 23x10 |
| Sparking Plug | DLA CM6 |
| Carburetor | Walbro (made in Japan) |
| Exhaust Amount | 58cc |
| Diameter*Stroke | 46mm*35mm |
| Ratio of Compression | 7.8 |
| Weight | Main Engine-1310g, Exhaust Pipe-110g, Ignition-135g |
| Material of Muffler and crankcase | Aluminum Magnesium Alloy (Aluminum Alloy for DLE55) |
| Machining | CNC processed, while others are not. |
| Crank Case Material | the newest aero material makes DLA58 engines too hard to be damaged. |
Parameters & Performance:, Ratio of Lubricating Capacity: 30:1--40:1 (Trial Run), 40: 1--50:1(Normal Flying), Included Spare Parts:, 1 x DLA 58CC Engine, Features:,
13.5Kg / 1800 meters Altitude (12.5kg for DLE55) 1 x ...ReadyMadeRC
DJI 5.8GHZ VIDEO DOWNLINK (TRANSMITTER + RECEIVER)
The Wireless Video Link includes both transmitter (TX) and receiver (RX) modules, working in the ISM frequency band of 5.8GHz (5725-5865MHz). Analogue modulated video signals are sent wirelessly by the TX module to the RX module, and then the video signal will be demodulated and sent to a display. There are 8 wireless channels can be selected when you are using this product.These channels are:CH1-5705MHZ, CH2-5685MHZ, CH3-5665MHZ, CH4-5645MHZ, CH5-5885MHZ, CH6-5905MHZ, CH7-5925MHZ, and CH8-5945MHZ., The characteristics of this product are: small size, low power consumption and high sensitivity. The product can be used in many applications requiring wireless video communication. When it's used in the aero-modeling hobby, the Wireless Video Link TX will be mounted to the aircraftand the Wireless Video Link RX is connected to a display screen, allowing video signal wireless transmission,
The new DJI Downlink is specially designed to work with ...ReadyMadeRC
CELLPRO POWERLAB 6 V2 WITH EC5 INPUT CABLE, 1000W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
More on the PowerLab Philosophy:, Power is important, but means little without other key features of SAFETY,RELIABILITY, FLEXIBILITY, and INTUITIVE OPERATION; the key elements that are painstakingly crafted into the Cellpro product line. The competition will come along with powerful chargers after we lead, but they will have trouble harnessing this power., SPECFIFICATIONS:, For Battery types:, Lithium Polymer (1s to 6s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 6s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 6s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 6s balanced, 1s to 8s unbalanced), NiCd (1s to 19s), NiMH (1s to 19s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 40A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 40A input current*, Output battery discharge current:, Internal discharge 10mA to 8A, 50W max Regenerative discharge 10mA to 40A, 1000W max**, Continuous max output power:, 408W @ +12VDC input, 1000W @ +30VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Single, 13 CFM, 50mm diameter, Heat sink:, Internal 120W,
POWER Welcome to PowerLab 6, the second offering in the ...SDSHobby
CC3D OPENPILOT OPEN SOURCE FLIGHT CONTROLLER WITH 32 BITS PROCESSOR FOR RC MODELS
Introduction of OpenPilot:, OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use. Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.,
ReadyMadeRC
DJI E600 TUNED PROPULSION SYSTEM FOR QUADCOPTERS
E300/E600 specifications:, , PROPELLER:, 20% ~ 25% efficient, carefully balanced., 2212 / 3508 MOTOR:, Our new self-tightening mechanism dramatically reduces any chance of loosening rotor or mistakenly installed rotors., 15A/20AESC:, Improved ESC along with new highly efficient and quick response algorithms, providingextra maneuverability and stability in wind and during descending.By using coaxial-cable, which provide a calm electromagnetic environment for the airborne sensors., Accessories pack now available within the package:, What’s inside? Power Hub, Compatibility VS Size of Craft:,
E300/E600 The E series tuned propulsion system is the first ...